Roof panels and hoist rail

The roof panels are all up and so the hoist rail can go in permanently (big thanks to my brother for the help).  I'm very happy with the result.  From now on it will be a lot easier putting in panels since they are on the wall.

I have also had a chance to test the LED lighting which looks great!

Lifting Hoist and Cladding

It has been a while since my last post.  Progress continues with all going well.  With most of the flying aspects of the trailer being close to finished, current work involves cladding and hoist work.

The hoist mounts are now fixed into the roof structure and the hoist rail was able to be put up to test the positioning and function.  The hoist sits out in the open to lift users, and can move to directly over the top of the seat and then off into the corner when not in use.

Once the hoist rail was tested, it had to come out again to allow the cladding to go up.  Not the easiest job, but very necessary to keep the heat from radiating through the roof on those hot days.  Plus it looks great once up, and will cut down on the ambient light in the trailer.  The same will be going onto the walls and will give a much cleaner look, hiding all the cabling and structure.

I'm looking forward to seeing the finished look!

In Other News - First SoarAbility flight

I was excited to hear that over the weekend, SoarAbility had its first flight with a disabled passenger. By all accounts it went smoothly, and will hopefully be the first of many!

First Flight!

I got to fly the simulator for the first time today, and it was a lot of fun!

There is still lots to do, but this is another milestone achieved. The screen area covers one entire wall as planned, and the instruments tie in and work beautifully. Currently it is just projecting onto the wall, hence the lines from the trailer structure. Since I am now using the proper PC rather than an old laptop, the refresh rates on both the screen and the instruments is ultra smooth.

There are some bits and pieces to sort out with respect to cabling, but that's about it. Next job: ceiling mounted hoist!

Seating finished

The seating is now finished in the Sim. Not the most exciting post for someone wanting to read about flying, but it does mean I'm getting closer! It has underseat storage, is comfortable and looks good! Nuff said!

Fuselage installed into Trailer

Hi Everyone

Progress has been a little slow over the past few weeks, but the Simulator has now reached a bit of a build milestone. The fuselage was mounted into the trailer over the weekend, having had all the wiring finished over the previous weeks.

Overall I am very happy with the results, with the space around the fuselage seeming much more open that it appeared on the computer screen. This just makes getting around and working on the Sim easier, and will no doubt make using it easier as well!

Sitting in the seat is quite exciting. The image will be projected over the entire wall and should look fantastic. I can't wait to get it running!

Instrument panel update No.2

This picture shows the instrument panel with buttons, switches and instruments in place.

The next step is to mount and wire it into the fuselage